Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Illustrate Rayleigh’s upper bound technique to estimate the natural frequency of system.
What are steady state handling characteristics of over steer vehicle? Critically discuss the factors which affect the rolling resistance of tyres.
Illustrate clearly constructional details and operation of different rear axle drives. Illustrate your answer with neat and simple sketches.
Which type of the rear axle is appropriate for heavy vehicle? Discuss. Write down the various loads acting on the rear axles.
Illustrate the construction of pressure-volume diagram of a typical four stroke petrol engine.
List the advantages of multi cylinder engines. When maximum torque is attained in the particular gear?
Water is flowing through tapering pipe having diameters 300 mm and 150 mm at sections 1 and 2 respectively. Section 1 is 10 m above datum and section 2 is 6 m above datum. Determine the intensity of
Write down the mechanism of NOx emission in the CI engine? How the NOx emissions in diesel engines can be controlled?
Illustrate the effects of spark plug location and spark timing on NO formation in SI engine
Write down the effect of transient operation of engine on pollution. How the HC emissions formed in the SI engines?
Illustrate the construction and working of Chevrolet turbo glide transmission.
Sketch and illustrate the Working of Cotal gear box. Discuss the construction and working of the Ford T Model transmission with neat sketch.
Write down the advantages of Automatic Transmission. Write down the functions of the Control unit in ECT.
What do you mean by rigidity modulus? What do you mean by kinematic viscosity?
Explain D’ Alembert’s principle in detail. Describe inertia force and inertia torque.
Shaft of 100mm diameter and 1 meter long is fixed at one end and other carries a flywheel of mass one tonne. By taking Young’s modulus of shaft materials as 200GN/m2, determine the natural fre
If maximum permissible stress in belt is 2 MN/m2, determine the maximum power transmitted and initial tension in belt.
Explain inversion. Describe any three inversion of single slider mechanism, with neat and suitable sketches.
Write down the various sources of errors in measurements and measuring instruments? Describe in detail.
Write down the name of any four actuating mechanisms used in transducers.
Describe the working of Nuclear Power Plant with the suitable sketch?
Illustrate out the different types of light commercial vehicle bodies with appropriate sketches.
Write down the purpose of the conducting wind tunnel tests? Illustrate out the term vehicle drag.
Give a description of intensity of radiation. How does thermal stress influence the cylinder piston?
Write down any four properties of the good refrigerant?