Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Describe significant characteristics of the Moulding sand.
Explain the limitations of the hot rolling.
Explain what is computational efficiency?
Explain the different kind of machining operation which can be carried on the lathe.
Explain the classification of the Non-traditional machining processes.
Describe the working of vapour absorption refrigeration system.
Describe the morse test for determining the indicated power of the multi cylinder engine.
Explain how do you measure the quality of air supplied to the IC engines.
A shaft of diameter 10 mm carries at its centre a mass of 12 kg. It is supported by two short bearings, the centre distance of which is 400 mm. Compute the whirling speed.
A horizontal cross compound steam engine computes 300 kW at 90 rpm. The coefficient of fluctuation of energy as found from the turning moment diagram is to be 0.1 and the fluctuation of speed is to
Explain the Simple Harmonic motion. Describe about the degree of freedom.
A porter governor has all four arms 300 mm long. The upper arms are attached on the axis of rotation and the lower arms are attached to the sleeve at a distance of 25 mm from the axis. The mass of e
PQRS is a four bar chain with link PS is fixed. The lengths of the links are PQ=62mm; QR=175mm; RS=112mm and PS=200 mm. The crank PQ rotates at 10 rad/sec clockwise. Develop the velocity and acceler
Explain the quaternary joint and ternary joint.
What is meant by kinematic indeterminacy and its relation with stiffness matrix?
Explain ‘Gibbs Phase rule’. What is its significance? How are equilibrium diagrams categorized? Write down the different Heat-Treatment processes and describe any two of them briefly.
Write down difference between Brittle fracture and Ductile fracture.
As per Taguchi; what is meant by quality design? Explain its contents in detail.
Explain the retrieval and generative types of CAPP with appropriate diagrams.
Describe about the Opitz and MICLASS systems of parts classification and coding in detail.
Air at the temperature of 300 K flows in the centrifugal compressor running at 18000 rpm. Other data given is as follows. Isentropic total head efficiency = 0.76. Compute: the temperature rise of ai
Low Pressure air Compressor develops the pressure of 1500 kgf/m2. If initial and final states of air P1 = 1.02 bar, T1 = 300K and T2 = 315 K. Find out the compressor and infinitesimal stag
How is the degree of reaction of an axial turbine stage defined?
Design the mechanical characteristics of the D.C series motor.
Write down the functions of a baffle in a heat exchanger.