Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Assume 70oC liquid water at 100 kPa is cooled to 45oC as it heats 15 kg of copper pipe from 20 to 45oC. How much mass (kg) of water is needed?
A computer CPU chip consists of 50 g silicon, 20 g copper, and 50 g polyvinyl chloride (plastic). How much energy did the heating require?
Find the energy the brake removes from the mass and the temperature increase of the water, assuming its pressure is constant.
Ammonia (0.5 kg) in a piston/cylinder at 200 kPa, -10oC is heated by a process. Find the work and heat transfer for the ammonia in the process.
It is now heated by a process in which pressure is linearly related to volume. Find the final volume, the heat transfer, and the work in the process.
It is now cooled so that the water occupies half of the original volume. Find the work and heat transfer done in the process.
The valve is opened and the air comes to a single uniform state without any heat transfer. How do you determine the final temperature and pressure?
The process stops when the volume has doubled. How do you determine the final state and the heat transfer?
The black grille on the back of a refrigerator has a surface temperature of 35oC. How much energy can be removed during 15 minutes of operation?
Find the final temperature. Has the final state more or less vapor than the initial state? Find the final temperature and specific volume.
Discuss the results and the requirements for a substance to be a potential refrigerant.
Which process will lead to the larger work output: an isothermal process or a polytropic process with n = 1.25?
The valve is opened and stays open while the water in the two tanks comes to a uniform final state. Which two properties determine the final state?
A linear spring, F = ks(x - x0) with spring constant ks = 500 N/m, is stretched until it is 100 mm longer. Find the required force and the work input.
If 25 J is the work input to the master cylinder, what is the force and displacement of each piston and the work output of the slave cylinder piston?
A rigid tank with pressurized air is used (a) to increase volume of a linear spring-loaded piston. What is the expression for the work term in each situation?
Look at the R-410a value for uf at -50oC. Can the energy really be negative? Explain.
The setup is cooled at constant pressure until the R-134a reaches a quality of 25%. Calculate the work done in the process.
Air goes through a polytropic process from 125 kPa and 325 K to 300 kPa and 500 K. Find the polytropic exponent n and the specific work in the process.
It is now compressed to a pressure of 500 kPa in a polytropic process with n = 1.5. Find the final volume and temperature and determine the work done.
How much of a temperature difference from the ambient surroundings at 20oC must the refrigerator have in its heat exchanger with an area of 1 m2.
Can the butane reasonably be assumed to behave as an ideal gas at this state? Estimate the saturation pressure of chlorine at 300 K.
Determine the pressure of nitrogen at 160 K, v = 0.00291 m3/kg using the Soave EOS and the nitrogen table.
Heat is now added until the temperature reaches 200oC. Find the final pressure and also the quality if the water is in the two-phase region.
When the pressure drops to 18 psia, the flow of helium stops by itself. If all the helium is still at 540 R, how big a balloon is produced?