Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
What do you know about the following rocks and minerals: dolomite, gray wacke, flint, opal, plagioclase, smectites, and marcasite?
Compare the thermal performance and throughput of that system to the batch and continuous-flow systems of this chapter.
Design a simple feedback system that controls both temperatures, and determine how the fluid-temperature response time compares with what is achieved.
Design a silicon cantilever with a 2 µm thick ZnO film on it and electrodes above and below the ZnO film such that an applied voltage can result in free end.
Determine the actuation method and, using the modeling methods you have learned, estimate the expected performance.
Estimate the self heating of the Xducer assuming that the Xducer has the same dimensions. How does this error compare with the published offset drift?
Identify the system partitioning used, the device concept, and key details that affect either the package design or the choice of device fabrication technology.
What is the root mean-square amplitude of the fluctuation of the position of the proof mass?
is concrete the most widely used engineering material? Compared to steel, what are the engineering benefits of using concrete for structures?
What is the significance of elastic limit in structural design? Discuss the significance of drying shrinkage, thermal shrinkage, and creep in concrete.
What is the significance of the microstructure of a material? How do you define microstructure?
How many types of voids are present in a hydrated cement paste? What are their typical dimensions?
Also calculate the water-cement ratio needed to obtain zero porosity in a fully hydrated cement paste.
How the microstructure of hydration products in the aggregate-cement paste interfacial transition zone is different from the bulk cement paste in concrete.
Why is strength property most valued in concrete by designers and quality control engineers? discuss how strength and porosity are related to each other.
Explain how water-cement ratio influences the strength of the cement paste matrix and the interfacial transition zone in concrete.
Determine the speed of the cylinder after it has fallen 200 mm. How far has it fallen when it momentarily stops?
Determine from the company web site whether they provide tools for dealing with all four design levels, and with packaging interactions.
Determine, to the extent possible from the published material, the physical system partitioning, and whether the product uses position-control feedback.
Using the Deal-Grove model, determine dry oxidation times required to produce 100 nm of oxide on a bare silicon wafer at temperatures of 920, 1000, and 1100oC.
What is the edge-length variation for the diaphragm if the actual wafer thickness for different wafers varies between 490 and 510µm.
Discuss the similarities and differences between organisms in the domains Bacteria and Archaea.
Assume you work for CDC and you were assigned to develop a study to investigate the relationship between consumption of sweetened soda and diabetes.
Draw a diagram of a perfectly inelastic demand curve. Suggest an example of a good for which demand might be perfectly elastic.
A jet flies at an altitude of 12 km where the air is at -40oC, 45 kPa, with a velocity of 1000 km/h. Find the Mach number and stagnation temperature on nose.