Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Food nano technology and emulsion technology, Due Date: Format: Individual work ? written literature review Length: ~2,000 words Description: The major individual assessment task in this course req
Some home ISDN "modems" will combine two BRI channels together. What would the data rate be if you could use both channels simultaneously for data transmission?
An E1 is the European version of our T1. An E1 frame has 32 channels. The first channel is channel 0. All 8 bits of channel 0 are used for framing. Channels 1 to 15 are used for data or voice and no
What is the data rate of a single channel on a T1 connection that does not use bit robbing?
Radio Frequency Identification Tags (RFIDs) are being used in ever greater numbers for an increasing diverse number of applications, from libraries to retail shops to Oyster cards.
Represent Dr. Konur's problem on a network by defining the nodes, node values (if any), arcs, arc costs (if any), arc capacities (if any) and state it as a maximum-flow problem and mathematically fo
Formulate a maximum-flow problem that will determine the maximum number of people that can travel to the safe facilities
Represent the above problem as a network optimization problem. Particularly, you will need to formulate a minimum cost flow problem. Draw the network by defining the nodes, node values, and what the
Waste Management - Express the problem on a network by drawing nodes, arcs, determining node values, arc costs, arc capacities if any, such that no node has a capacity restriction associated with it
Express the above problem on a network by drawing nodes, arcs, determining node values, arc costs, arc capacities if any, such that no node has a capacity restriction associated with it and no node
CI-3110 - Give key reasons for the BP Texas City refinery explosion. What are recommendations to prevent further catastrophic event and what does SIS include
Draw on relevant theoretical and management concepts covered through the course and describe the problem or issue and critically analyse the issue including considerations of relevant policy and ecolo
What is the primary assumption behind using an analyst and what is the purpose behind the data collection?
Objective of this task is to collect and obtain information on variables of interest in a systematic way to prepare the required data for studying the decline rates of Bakken wells.
Bearing stresses are very common in aerospace engineering. It occurs on the surface of contact between any two structural members. Bolts, pins, and rivets are classic examples of where bearing stres
Ppurpose of the exercise is for students to develop a shaft sinking and lining strategy for the site and
Design a suitable ore pass to transport ore a vertical distance of 200m from the extraction level to the transport level of a block caving mining operation.
Describe a tunnel-boring machine in detail and cite examples of their use. Particular emphasis should be placed on the cycle of operations for such a machine.
State reasons for the popularity of decline mining in modern operations. What factors need to be taken into account in deciding the cut off depth beyond which shaft operations should be used instea
Determining the shape of shafts and the size of shafts - Detail the unit operations within a conventional drill and blast shaft sinking operation including the shaft bottom operations as well as tho
Briefly describe the mechanisms involved in the excavation of rock - What parameters are used when determining the shape of shafts and the size of shafts?
Determine concentration of fumes after they have spread throughout the drive but before they have entered the decline
What is the total development airflow and for a single Stope determine the required airflow for diesel dilution if the requirement is for 0.05 m3/s of air per kW of diesel power?
Draw in a decline from the surface (at -100) with nodes placed at every sub level to allow the break-offs to be established. Two ways are recommended to draw horizontal airways between levels.
Determine the airflows and pressure drop in each of the branches and what are the flows and pressure drops in each of the branches?