Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
petrol work in a well-ventilated area keep flames or sparks away from the work area or where petrol is
carbon monoxide if the engine has to be started make sure the area is well ventilated never start the engine in an enclosed area without using
objectives after studying this general safety and services tips you should be able to appreciate the importance of safety precautions accomplish the
introduction safety is very important which is often neglected at our workplaces small precautions if carried out regularly can ensure safe hygienic
service and maintenance procedures you have studied detailed procedure of motorcycle service and maintenance and points to be remembered while
inspection of electrical equipmentsteps all electrical equipment are checked for proper functioning the starting and lighting of the motorcycle
inspection of tyres steps both the tyres are checked for free rotation loose spokes are to be tightened at the same time it is checked that the
clutch free play adjustment a smooth operation of clutch ensures the smooth running of motorcycle hence it is essential to maintain a proper clutch
a what is the function of a throttle valve where it is usedb how do we adjust throttle free
throttle free play adjustmen a smooth operation of the throttle ensures proper acceleration of the vehicle according to the requirement of the rider
brake wear inspection and free play adjustment brake wear inspection is very important because worn out brake shoe does not provide good braking at
a what is value of drive chain slacknessb write about cleaning procedure and adjustment of drive chainc what is the wear of drive chain sprocket and
drive chain cleaning and adjustment the service life of the drive chain depends on proper lubrication and adjustment poor maintenance can cause
carburettor tuning it is very important that the carburettor is tuned properly to attain the best fuel efficiency and performance of the
a what may happen if carburettor is not serviced at a regular intervalb what is the procedure of carburettor
carburettor cleaning carburettor needs to be cleaned otherwise the jets may get clogged which may supply an inadequate amount of air fuel mixture
valve clearance and tappet adjustment like all metal components the valve expands on heating hence the valve clearance is set so that on expansion
centrifugal filter and screen filter cleaning oil may contain impurities since the oil passes through all the engine parts the impurities may
a what will happen if air filter is not usedb what are the components of an air filterc what precautions should be followed while cleaning the air
air filter cleaning air filter filters the air which enters into the carburetor then this air mixes with fuel and this mixture enters into
a how is specific gravity of electrolyte battery water measured and what should be the value of specific gravityb how would you measure battery
battery inspection a fully charged and properly maintained battery is essential for proper lighting and starting of the motorcyclesteps remove
a why do we change the engine oil at periodic intervalsb what are the recommended instructions to change engine oilc how will you measure the engine
engine oil replacementmotorcycle is thoroughly drained by kicking the vehicle several times inspect the drain bolt washer and replace if necessary
engine oil replacement and top up stepsbull the engine oil should be changed only when motorcycle has run through the prescribed kilometersbull