Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Write a program that will ask for the part number for two different parts (i.e. PX_12345, and ABC_329). Display these parts in ONE message box, in numerical order (i.e. the segment of the part numbe
Write a program that asks for the diameter of two different spheres. Then display to the user, the Maximum, Minimum, and Average volume of the spheres. Display this result in different lines of ONE
A household uses 10 therms of natural gas per month in a gas furnace for heating at a cost of $1.00/therm. For an electric heating system the cost of electricity is $0.10/kwh. Compare the cost of th
Calculate the temperatures of the object with the indicated solar albedo and IR emissivity placed out in the sun where solar radiation is 1100 W/m^2. Assume a rectangular shape of length 4 m and wid
acceleration of a particle traveling along straight line is a=(1/5)s^(1/2), s is in m, if v=0, s=3 when t=0 determine the particles velocity at s=6
Determine the time required for a car to travel 1 km along a road if the car starts from rest, reaches a max speed at some intermediate point, and then stops at the end of the road. the car can acce
A Particle is traveling on a straight line with velocity v=(3t^2-6t) where t is in sec. if s=4 ft when t=0, determine the position of the particle when t=4s. what is the total distance traveled duri
during construction of the surface layer of asphalt pavement, two samples where taken everyday to measure the asphalt content in the mix to ensure that it is within the specification limits. the tar
A 24-in.-long copper bar with a yield strength of 30,000 psi is heated to 120°C and immediately fastened securely to a rigid framework. The coefficient of thermal expansion for copper is 16.6x10
a meter long steel plate with a rectangular cross section(10mm x 50mm) is resting on a frictionless surface under the sun. the plate temperature is measures to be at 40C.
A first-order reaction that results in the destruction of a pollutant has a rate constant of 0.1/day. (a) How many days will it take for 90 per- cent of the chemical to be destroyed (b) How long will
A barometer filed with non-toxic glycerin is used to measure standard sea level atmospheric pressure. neglecting the effect vapor pressure and surface tension. calculate the atmospheric pressure hea
Titan, a moon of Saturn, is believed by astronomers to have an atmosphere that is about 95% nitrogen. At Titan's surface the acceleration due to gravity is 1.35 m/s2, the atmospheric pressure is 21
A system consists of a gas confined between a cylinder and piston such that work and heat may cross the boundary. What type of system is that. What type of system is a free body as used in mechanics
A 4 meter long steel plate with a rectangular cross section (10mm x 50mm) is resting on a frictionless surface under the sun. The plate temperature is measured to be at 40 degrees Celsius.
The total volume of the house is 650 m3 (assume that the volume is well mixed throughout). The radon source emits 250 pCi/s (A picoCurie [pCi] is a unit proportional to the amount of radon gas and i
A tank of Compressed oxygen for flame cutting is to contain 10 kg of oxygen at a preassure of 14 MPA ( the temperature is 20 degrees Celsius). How large must be the tank volume
Neon gas at 50 degrees C in a vertical cylinder of diameter 150 mm has a 6 kg frictionless piston mounted. The outside pressure is 98kPa and the neon volume is 4000cm^3. Find the mass of neon.
A vertical hydraulic cylinder has a 150-mm diatomic piston with hydraulic fluid inside the cylinder and an ambient pressure of 1 bar. Assuming standard gravity, find the piston mass that will create
2 kilomoles of diatomic oxygen gas are enclosed in a 10-kg steel container. A force of 2kN now accelerates this system. What is the acceleration
A 20-kg iron ball is moving at 100 km/hr should be accelerated at a constant rate of 10 m/(sec)^2. What is the force required
two 10 mm thick steel plates are fastened together by means of two 20mm bolts that fit tightly into the holes. if the joint transmits a tensile force of 45 kn determine the average normal stress in
The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high
Knowing that the magnitude of P is 35 N, determine by trigonometry (a) the required angle a if the resultant R of the two forces applied to the support is to be horizontal, (b) the corresponding mag
what are the three meterials based on the predominant types of bond and what are the predominant types of bond in each category