Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
A flow of 4.8 m3/s is to be developed from a 500 km2 watershed. The reservoir is estimated to cover 1,700 ha. The annual rainfall is 97 cm, the annual runoff is 30 cm, and the annual evaporation is
The industrial discharges to the municipal sewers are 57 m3/day at 1,800 mg/L BOD from a slaughterhouse and 70 m3/day containing 32 kg of BOD from a soup-canning plant.
A rural town with sewered population of 4,500 has a daily wastewater flow of 1,590 m3/day with an average BOD of 280 mg/L including industrial wastes. The industrial discharges to the municipal sewe
The water treatment capacity in 1995 was 165 ML/day. A survey showed that the average per capita water use rate was 700 L/(person.day). Estimate the community's water requirements in 2010
Compare the relative contributions of a treated water supply and the collection, treatment and disposal of human wastes towards the control of epidemic diseases in developing countries.
A trapezoidal channel is to be excavated in alluvial material on a bed slope of 1:10000. The side slopes will be 1(vertical) : 2(horizontal). Details of the bed material are as follows: Particle dia
A particular mixed flow pump is operating just below the point of cavitation. The pump is sited with its intake 3 m above the water level in the reservoir and delivers 0.05 m3/s.
One second later another ball is thrown vertically from the ground with a velocity of 10m/s. Determine the height from the ground where the two balls pass eachother.
A particle moves along a horizontal straight line with a constant acceleration of 5 meters per second squared to the left. The particle starts with a velocity of 10 meters per second to the right.
What is the difference between universal beam and universal column steel sections in terms of performance in bending
Elongation (in %) of steel plates treated with aluminium are random with probability density function f(x)={x/250 20<x<30 and 0 otherwise a)What proportin of steel plates have elongations greate
A rigid tank whose volume is 10L is initially evacuated. A pinhole develops in the wall, and air from the surroundings at 1 bar, 25 degrees Celsius enters until the pressure in the tank becomes 1 ba
Determine the components of displacement at 1. Take E = 200 GPa, I = 250(10^6) mm^4, A = 12(10^3) mm^2 for each member.
A wide rectangular channel has a change of slope from 1 in 100 to 1 in 500 and the flow is 4m3/s/m. Manning's n can be taken as 0.015 Determine the normal depth of flow before and after the change in
A cylindrical rod of 1040 steel originally 15.2 mm (0.60 in.) in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation.
A rectangular channel of 2 m depth and 5 m width carries 1 m deep running water. It is laid to a slope of 0.001 with Manning's n = 0.02. Some distance downstream there is a hump of height 0.5 m on t
The roadway is to be widened which will require a slope face cut at a steeper angle. Assume zero cohesion along the joints. What engineering parameter must the joint surfaces possess (magnitude) to
Along the length of the channel the bed drops by an average of 2.5 metres every kilometre. Historic accounts indicate that the maximum flow of water in the channel prior to the construction of the g
The cylindrical wall of the tank is 6mm thick, has a 600mm inside diameter, and is made of steel with E = 200 GPa and v = 0.30. Determine the pressure in the tank indicated by a strain gage reading
A single strain gage is cemented to a solid 4-in diameter steel shaft at an angle B = 25 degrees with a line parallel to the axis of the shaft. Knowing that G = 11.6*10^6 psi
A short concrete column is being used to support the roof over a pedestrian walkway. The unbraced column length is 9 feet and supports a dead load of 12 kips and a live load of 20kips.
A typical energy of a laser pulse from such lasers is 1 mJ. Suppose that energy is uniformly distributed over the laser spot, and the effect is constant during the pulse (a square pulse).
The initial velocity of the brick in position A is 40 ft/s. If the coefficient of kinetic friction between the block and the plate is .40, determine the time it takes the block to reach position b o
A contractor wants to build a fill at his new construction site. He has two options for purchasing his borrow material. Site A has a soil with a unit weight of 2.5 kN/m3, a moisture content of 14% a
a) Density plot, locating γd(max) and ω opt on the plot b) Zero-air voids curve for the soil on the same plotc) Curve representing S = 70%