You need to draw the internal table of in/out port/VP/VC relationships for this problem. Provide a diagram based on the following information, and then show the internal tables for both ATM switches sw1, and sw2.
You _do not_ need to show entries on reserved VCC's (e.g., 0,5; 0,16, etc.)
Scenario:
** Physical (you're supposed to draw this)**
4 workstations ws1..ws4; 2 ATM switches sw1, sw2.
Ws1 on port 1 of sw1; ws2 on port 2 of sw1; ws3 on port 1 of sw2; ws4 on port 2 of sw2.
Sw1 and sw2 connect to each other using their port 3.
** Logical connections (you're supposed to annotate your drawing, and show what the internal port/vp/vc in/out tables in the switches look like for the described virtual connections **
ws1 has virtual circuit to ws3 (e.g., ws1 did a telnet to ws3),
each workstation using (0,50) for both directions on their UNI.
ws2 has virtual circuit to ws4, each also using (0,50) for both directions on their UNI You get to select what (vp,vc) the switches use between each other,as long as it is feasible. Show the VP,VC's you select in your diagram, and in the table you create.