What will be the final height of the workpiece
A solid, cylindrical workpiece made of 5052-O Aluminum is 12 cm high and 8 cm in diameter. Assuming there is no friction, what will be the final height of the workpiece if a 3 MN forging press is used, and the flow stress is estimated to be 85 MPa?
Expected delivery within 24 Hours
The table below contains profit projections for various decisions to be made by the University. The associated probabilities for the states of nature are .40 for high demand, .35 for medium demand; and .25 for low demand.What is the best decision
A 900 kg crate is on a rough surface inclined at 30 degrees. A constant force P=7200N is applied horizontally to the crate. While this force pushes the crate a distance of 3 m up the incline, its velocity changes from 1.2 m/s to 2.3m/s. How much w
Using both graphical and analytical methods in assessing the stability of the rock mass and calculate factors of safety for both the intact rock and the discontinuity for the following stress conditions.
Suppose 2.5 kg of 32 deg C water is mixed with 9.3 kg of 65 deg C water. if no heat is lost in this system, then what is the final temperature of the water.
Assuming there is no friction, what will be the final height of the workpiece if a 3 MN forging press is used, and the flow stress is estimated to be 85 MPa?
An independent-measures research study uses two samples, each with n = 12 participants. If the data produce a t statistic of t = 2.50, then which of the following is the correct decision for a two-tailed hypothesis test?
A 120-m long steel wire has a coefficient of linear exspansion of 11x10^-6 /Celcius. give its change in length as the temperature changes from 10 degrees celcius to 45 degrees celcius. show work.
Describe the Type I and Type II errors with your study. What are the ramifications of making these errors (from a clinical perspective)?
1926397
Questions Asked
3,689
Active Tutors
1439141
Questions Answered
Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!
Evidence of Cultural Impact: The cultural impact of economic factors can be observed through specific practices and initiatives within the NSHA:
Mrs Robinson is unconscious. When performing eye care as part of hygiene, which of the following interventions should be performed by the nurse Selec
Problem: Discuss some ethical issues that limit access and quality of care.
Question: Which one of the following is NOT present in tetralogy of Fallot?
Problem: The charge nurse is observing a staff nurse complete an incident report after a client fell on their way to rest room.
Winslow's definition of Public Health from the 1920's marks a significant recognition of the principles of health promotion in modern history.
Point of use cleaning of used instruments MUST be performed immediately following the procedure in the following location