What are the forces on the beam, Physics

What are the forces on the beam

A gymnast with mass 47.0 kg stands on the end of a uniform balance beam as shown in the figure. The beam is 4.60 m long and has a mass of 260 kg (excluding the mass of the two supports). Each support is 0.530 m from its end of the beam. In unit-vector notation, what are the forces on the beam due to (a) support 1 and (b) support 2?

Request for Solution File

Ask an Expert for Answer!!

Physics: What are the forces on the beam

Reference No:- TGS0733431

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Physics

Q : What would be the expected life of the bearing

A catalog lists the basic dynamic load rating for a ball bearing to be 7050 lb for a rated life of 1 million revolutions. What would be the expected L10 life of the bearing if it were subjected to a load of 3500 lb?

Q : Worm completely submerged under water

You are out on your friend's boat in Mission Bay soaking up rays and fishing for tuna. You have a big fat worm on the end of your fishing line. You are holding your fishing rod so the worm is completely submerged under water to tempt the fish.

Q : What will be the approximate distance from the pipe

Oil with a kinematic viscosity of 0.0035ft3/s flows through a 4-in-diameter pipe with a velocity of 15ft/s. What will be the approximate distance from the pipe entrance to the first point at which the flow is established?

Q : What distance would the person travelling

Explain, using either time-dilation or length contraction arguments. If they want to make the trip in 22 y what distance would the person travelling at nearly the speed of light measure (in light years, do not enter a unit)

Q : What are the forces on the beam

The beam is 4.60 m long and has a mass of 260 kg (excluding the mass of the two supports). Each support is 0.530 m from its end of the beam. In unit-vector notation, what are the forces on the beam due to (a) support 1 and (b) support 2?

Q : Why use moody chart and manual iteration

Gasoline is being discharged from a pipe at point 2 at elevation 66.66 m. Pint 1, located 965.5 m along the pipe from point 2, is at elevation 82.65 m, and the pressure there is 2.50 kPa.

Q : What is the speed of the ball in orbit

You have a ball on a wire that is twirled in a circular orbit with a radius of 3.3 m, and the centripetal force acting on the ball, that has a mass of 47 kg, is 353 N. What is the speed of the ball in orbit?

Q : Find tensile force in cord connected to the cone to tank

An inverted cone is placed in a water tank. If the weight of the cone is 16.5 N, What is the tensile force in the cord connected to the cone to the bottom of the tank?

Q : Difference between the times the call

Police response time to an emergency call is the difference between the times the call is first received by the dispatcher and the time a patrol car radios that it has arrived at the scene. over a long period of time it has been determined that th

1935865

Questions
Asked

3,689

Active Tutors

1422385

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Physics: What are the forces on the beam

Reference No:- TGS0733431

Have a Question? (oR Write a Review)

Recent Questions Asked Physics

Q : What would be the expected life of the bearing

Q : Worm completely submerged under water

Q : What will be the approximate distance from the pipe

Q : What distance would the person travelling

Q : What are the forces on the beam

Q : Why use moody chart and manual iteration

Q : What is the speed of the ball in orbit

Q : Find tensile force in cord connected to the cone to tank

Q : Difference between the times the call

Problem about healthcare services and providers

What not be considered protected health information

What safety committee is comprised of

How protect patient information in event of a data breach

How healthcare industry is seeing significant advancements

Name one policy that did not exist prior to 9/11

Problem about reason for exam of dizziness

Request for Solution File

Ask an Expert for Answer!!

Physics: What are the forces on the beam

Reference No:- TGS0733431

Recent Questions Asked Physics

Q : What would be the expected life of the bearing

Q : Worm completely submerged under water

Q : What will be the approximate distance from the pipe

Q : What distance would the person travelling

Q : What are the forces on the beam

Q : Why use moody chart and manual iteration

Q : What is the speed of the ball in orbit

Q : Find tensile force in cord connected to the cone to tank

Q : Difference between the times the call

Asked Questions