Assessment - Source Coding Implementation Using MATLAB/Simulink Purpose of the assessment - Report on the characteristics of sampling and analogue to digital conversion and source coding;
Assignment Description:
The purpose of this assignment is to motivate students to seek to application of waveform coding techniques for digital audio transmission and digital audio recording. The assignment has two parts: Part A and Part B.
Part A: Source Coding in Digital Audio Systems
Digital audio has become an integral part of our lives. Nearly all of the transmission of speech signals over telephone channels is currently digital. Moreover, digital audio recording in the form of compact disks (CDs) has become very popular. This assignment exposes the student to real world applications of digital communication in digital audio transmission and recoding. Therefore, the student shall acquire skills to understand the real world requirements, critically review the existing techniques and write a technical report based on his or her investigation.
Requirements
The student needs to address the following three areas:
1) Requirement analysis: student is required to analyze the following for digital audio in telephone transmission systems:
- Bandwidth of speech signals and the required sampling rates to avoid aliasing
- Required number of bits per sample to achieve voice quality in telephony
- Typical bit rates used for local loops as well as on trunked lines;
In addition, student is also required to analyze the following for digital audio recording:
- Bandwidth of high quality audio and the required sampling rates
- Required number of bits per sample to achieve a high signal to quantization noise level for high quality audio.
2) Investigation of current methods: student is required to review and analyze waveform-coding techniques used in digital audio transmission and recording at present. At least PCM and DPCM methods need to be covered.
3) Investigation of new developments: student is required to do some research into the latest developments in waveform coding techniques for digital audio transmission and recoding.
PART B: Implementation of µ-law and A-law compander
Most modern communications systems operate in the digital domain for various reasons. However, most practical signals handled by these systems are naturally analogue in nature. Thus, an interface is needed between the signals and the systems handling them. This interface is called analogue-to-digital converter (ADC) and it's reciprocal, digital-to analogue converter (DAC). The three main components in the ADC are sampler, quantizer and encoder.
Requirements
1) Implement nonlinear quantizers µ-law and A-law compander in MATLAB/Simulink and compare the result. Matlab/Simulink code is required to include in report.
2) Prepare a report incorporating theories behind the sampling, quantization and encoding. Report should include comparison result and its interpretation from the simulation.