1. iLab5A (Software Triggered ADC Conversion) - Paste a picture of the LEDs. As you turn the dial for the potentiometer what are the two extreme patterns for the LEDs?
2. iLab5B (Interrupt Triggerd ADC Conversion) - Paste a picture of the board showing the jumper that connects IOC1 to ETRIG1 Paste a scope capture of the pulse that triggers the A/D conversion At what frequency is this pulse taking place? ________________
3. iLab5C (Interrupt Triggerd ADC Conversion with Dual DAC Conversion) - Paste ALL the code for your design project that is part of your main.c file. Make sure it looks neat. Use single spacing and a font size of 10
4. iLab5C (Interrupt Triggerd ADC Conversion with Dual DAC Conversion) - Paste a scope capture showing the two waveforms being output by the ADC. Include a diagram of the LCD board with all the necessary connections -- use the board outline included in this document. Paste a scope capture of the pulse that triggers the A/D conversion At what frequency is this pulse taking place? _____________
Questions
1. What commands are utilized for the configuration of the ADC polling software? How does each affect the operation of the ADC?
2. Discuss challenges experienced in working on the lab project.
3. What time is there between the ATD conversions for Lab 5b? What method can you use to determine the time between ATD conversions?
4. What commands are utilized for the configuration of the ADC interrupt software? How does each affect the operation of the ADC?