Draw the front view of the tube bundle support shown in Fig. 18-15. Proceed as follows:
• Draw the outside circle and one of the holes.
• Offset both circles to create the width of the material.
• Draw a line connecting the center of the outside circle and the center of the hole.
• Offset the line to create the internal support structure that connects the hole with the center of the support.
• Draw another line from the center of the large circle at an angle of 30° to the first line.
• Use TRIM to create half of one cavity.
• Use MIRROR to create the other half of the cavity.
• Fillet the three corners.
• Use ARRAY to insert five more copies of the hole and cavity.
When you have completed the drawing, use the SCALE command to shrink it by a factor of .25 using the obvious base point. Save the drawing as tubebundle.dwg.
![229_dad0df43-e524-465d-8542-bf42a101ecbb.png](https://secure.tutorsglobe.com/CMSImages/229_dad0df43-e524-465d-8542-bf42a101ecbb.png)