How many neutrons are absorbed in target for cross section, Mechanical Engineering

How many neutrons are absorbed in target for cross section

A tiny beryllium target located at the center of a three-dimensional Cartesian coordinate system is bombarded by six beam of 0.0253-eV neutrons of intensity 3×108 neutrons/cm2-s, each incident along a different axis. (a) What is the 2,200 meters-per-second flux at the target? (b) How many neutrons are absorbed in the target per cm3 per second assuming the thermal microscopic absorption cross section for Be is 0.010 barns and the mass density is 1.85 g/cm3?

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: How many neutrons are absorbed in target for cross section

Reference No:- TGS0841632

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : What will be the new pressure if the volume is decreased

A sample of gas as 1/2 atm pressure occupies a volume of 158 ml, if temperature is held constant, what will be the new pressure if the volume is decreased to 123 ml?

Q : Mean and standard deviation equal

A machine operation produces bearings whose diameters are normally distributed, with mean and standard deviation equal to .498 and .002 respectively. If specifications require that the bearing diameter equal .500 inch ± .004 inch, what frac

Q : What is the horizontal distance from the edge of the plank

If the indians push with a force of 1,100 N parallel to the plank, what is the horizontal distance from the edge of the plank (d) that each crate hits the water?

Q : What would occur if sodium hydroxide had been used

In the separation of benzoic acid, 4-tertbutylphenol, and biphenyl, what would occur if sodium hydroxide had been used in the first extraction?

Q : How many neutrons are absorbed in target for cross section

What is the 2,200 meters-per-second flux at the target? How many neutrons are absorbed in the target per cm3 per second assuming the thermal microscopic absorption cross section for Be is 0.010 barns.

Q : What is the inductive reactance of the inductor

The peak current through an inductor is 13.0 when connected to an AC source with a peak voltage of 0.50 . What is the inductive reactance of the inductor?

Q : What would the accelerations of all three masses be

The tension is pulling m1 to the left while the tension acting on m2 is pulling it to the left and right. m3 is hanging from a pulley off the table and above the ground. What would the accelerations of all three masses be?

Q : Why would the percent recovery be lower

When carrying out the acid-base extractions in lab, you notice that you were asked (in the "Hints of Preparation") to extract with sodium bicarbonate only once while the procedure directs you to carry out the extraction with a 2nd amount of sodium

Q : Treat the door as a thin plate having given mass

An angular velocityw=2.5rad/swhen it is released from rest at theta=90degrees. For the calculation, treat the door as a thin plate having a mass of 90kg.

1933582

Questions
Asked

3,689

Active Tutors

1442901

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: How many neutrons are absorbed in target for cross section

Reference No:- TGS0841632

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : What will be the new pressure if the volume is decreased

Q : Mean and standard deviation equal

Q : What is the horizontal distance from the edge of the plank

Q : What would occur if sodium hydroxide had been used

Q : How many neutrons are absorbed in target for cross section

Q : What is the inductive reactance of the inductor

Q : What would the accelerations of all three masses be

Q : Why would the percent recovery be lower

Q : Treat the door as a thin plate having given mass

Patient noticed that his skin is redder than normal

What if patient has excessive dryness of the skin

How interconnected health technology really is

Male in hematology clinic with signs of progressive fatigue

Patient complains of diaphoresis, fatigue, abdominal pain

Patient been getting chest pains at weird times

Neurological nurse cares for clients having seizure disorder

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: How many neutrons are absorbed in target for cross section

Reference No:- TGS0841632

Recent Questions Asked Mechanical Engineering

Q : What will be the new pressure if the volume is decreased

Q : Mean and standard deviation equal

Q : What is the horizontal distance from the edge of the plank

Q : What would occur if sodium hydroxide had been used

Q : How many neutrons are absorbed in target for cross section

Q : What is the inductive reactance of the inductor

Q : What would the accelerations of all three masses be

Q : Why would the percent recovery be lower

Q : Treat the door as a thin plate having given mass

Asked Questions