How long it take sphere temperature to drop temperature
A pure copper sphere with a diameter of 3.0 cm is initially at uniform temperature of 50 °C. It is suddenly exposed to an airstream of 10 °C with h = 15 W/m2-°C. How long does it take the sphere temperature to drop to 25 °C?
Expected delivery within 24 Hours
A charged particle A exerts a force of 2.60 µN to the right on charged particle B when the particles are 14.0 mm apart. Particle B moves straight away from A to make the distance between them 17.1 mm. What vector force does particle B then e
Steam at 260 c and 1 atm flow through an 8-in. schedule-80 steel pipe at a rate of 10,000 lb/hr. Estimate the value of h which applies at the inside pipe surface.
Assuming that the engine is made of iron and has an average thickness of 6.5cm between the combustion chamber and the outside surface, determine the heat transfer rate per unit of wall area when combustion of fuel occurs.
Suppose 5.00 g of hydrogen is separated into electrons and protons. Suppose also the protons are placed at the earth's North Pole and the electrons are placed at the South Pole. What is the resulting compressional force on the Earth?
It is suddenly exposed to an airstream of 10 °C with h = 15 W/m2-°C. How long does it take the sphere temperature to drop to 25 °C?
A-2-m by 1.5-m section of wall of an industrial furnace burning natural gas is not insulated, and the temperature at the outer surface of this section is measured to be 80 C.
In a jet engine a flow of air at 1000 K, 200 kPa and 40 m/s enters a nozzle where the air exits at 500 m/s, 90 kPa. What is the exit temperature assuming no heat loss?
A diffuser, shown in Fig. P6.36, has air entering at 100 kPa, 300 K, with a velocity of 200 m/s. The inlet cross-sectional area of the diffuser is 100 mm2. At the exit, the area is 860 mm2, and the exit velocity is 20 m/s.
The front of a jet engine acts as a diffuser receiving air at 900 km/h, -5°C, 50 kPa, bringing it to 80 m/s relative to the engine before entering the compressor. If the flow area is reduced to 80% of the inlet area find the temperature and pr
1949144
Questions Asked
3,689
Active Tutors
1457320
Questions Answered
Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!
The risk factors for morbidity, mortality, disability, and other health issues can be determined through which of the following?
What does practice excellence affect? Need Assignment Help? Negative practice change Positive practice change All of the above None of the above
The emphasis on non-clinical staff and their training in electronic health record (EHR) systems addresses a critical gap in current literature
Moving to a Value-Based Model Improved care and decreased costs are the goals of VBC. By switching to value-based care, providers who leverage
How do you plan to balance the demands of a rigorous nurse practitioner program with other personal or professional commitments?
"Nursing as a profession is the career or occupation of individuals who are educated, trained, and licensed to practice. It is the practical application
Nurses working at a large children's hospital care for children who present to the emergency department (ED) with signs and symptoms of asthma.