Find maximum force for extruding cylindrical al billet, Mechanical Engineering

Find maximum force for extruding cylindrical al billet

Estimate the max. force required for extruding a cylindrical Al billet of 50mm dia and 75 cm long to a final dfiamter of 10 mm. The average tensile yield stress for Al is 170N/mm2. What percentage of the total power input will be lost in friction at the start of operation?

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Find maximum force for extruding cylindrical al billet

Reference No:- TGS0743250

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : How many electrons make up the final charge

Four identical metallic objects carry the following charges: +1.29, +6.21, -4.54, and -9.14C. The objects are brought simultaneously into contact, so that each touches the others. Then they are separated. (a) What is the final charge on each objec

Q : Is the volume of phenanthroline solution enough to complex

The standard recipe used in an exercise uses 3.0 mL of 0.25% phenanthroline solution in 100 mL of final solution to generate the red iron-phenanthroline complex which is determined colorimetrically.

Q : What would you see onthe tlc plate under the uv light

Suppose .015 g of dichlorobenzene was combined with 10 ml ofdiethyl ether. This mixture was used to spot a TLC platecoated with silica gel and placed in a chamber of hexene.

Q : How many millicuries of radioactivity are associated

How many millicuries of radioactivity are associated with a sample containing 5.10 mg Th (mass number of 229), which has a half-life of 7340 years?

Q : Find maximum force for extruding cylindrical al billet

Estimate the max. force required for extruding a cylindrical Al billet of 50mm dia and 75 cm long to a final dfiamter of 10 mm. The average tensile yield stress for Al is 170N/mm2.

Q : How many mls of 10m solution would you use

If you have 5L of a 10M solution and wish to make 100 mLs of 0.01M, how many mLs of 10M solution would you use and how much water would you add to make the diluted solution?

Q : Find number of moles of helium and mass of helium in balloon

A spherical balloon with a diameter of 6 m is filled with helium at 20°C and 200 kPa (absolute). Determine the number of moles of helium and the mass of the helium in the balloon.

Q : What is the electric field at the center of the square

Charges of 6.0 X 10^-7 C are each located at three corners of a square that is 1.0 m on each side. A charge of -1.3 x 10^-6 C is located at the other corner. What is the electric field at the center of the square

Q : How much hydrogen was produced

The 12.8 gram of sulfur was produced during the thermal decomposition of hydrogen sulfide . How much hydrogen was produced?

1955581

Questions
Asked

3,689

Active Tutors

1432131

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Find maximum force for extruding cylindrical al billet

Reference No:- TGS0743250

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : How many electrons make up the final charge

Q : Is the volume of phenanthroline solution enough to complex

Q : What would you see onthe tlc plate under the uv light

Q : How many millicuries of radioactivity are associated

Q : Find maximum force for extruding cylindrical al billet

Q : How many mls of 10m solution would you use

Q : Find number of moles of helium and mass of helium in balloon

Q : What is the electric field at the center of the square

Q : How much hydrogen was produced

How client is at risk at developing an infection

Which cause of amenorrhea should the nurse suspect most

Patient reported a scaly, circumscribed, erythematous lesion

Discuss potential diversity in group that you anticipate

Identify a specific health outcome or public health concern

What if auscultate crackles in the poster left lover lobe

Struggle with providing proper hygiene for the patients

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Find maximum force for extruding cylindrical al billet

Reference No:- TGS0743250

Recent Questions Asked Mechanical Engineering

Q : How many electrons make up the final charge

Q : Is the volume of phenanthroline solution enough to complex

Q : What would you see onthe tlc plate under the uv light

Q : How many millicuries of radioactivity are associated

Q : Find maximum force for extruding cylindrical al billet

Q : How many mls of 10m solution would you use

Q : Find number of moles of helium and mass of helium in balloon

Q : What is the electric field at the center of the square

Q : How much hydrogen was produced

Asked Questions