Estimate the heat loss from the kiln, Mechanical Engineering

Estimate the heat loss from the kiln

A small kiln for firing ceramic products has inside dimensions 1 m wide, 1 m high, and 1.5 m deep. The walls are 50 cm thick and made of zirconia brick. At steady operating conditions the inside temperature is 700^oC, and the ambient air temperature is 25^oC. If the outside heat transfer coefficient is approximately 5 W/(m2K), estimate the heat loss from the kiln. Take k = 2.4 W/(mK) for zirconia brick.

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Estimate the heat loss from the kiln

Reference No:- TGS0747992

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : Gravity combine for an acceleretion

A toy is launched upward with a spring.its launch speed is 114m/s(upward),and it is under no power once launched.while flying upward,air resistance and gravity combine for an acceleretion of 11.4m/s/s(downwards).

Q : Find column height if the manometer fluid were mercury

What column height of water would be required to measure the inlet to exit pressure difference using a manometer? What would the column height be if the manometer fluid were mercury?

Q : Write down the component of the acceleration

If the ramp is inclined at 28.5° with respect to the ground, what is the component of her acceleration that is parallel to the ground?

Q : Fundamental frequency of the shortened air-filled tube

What is the absolute pressure at the bottom of the mercury column, when the fundamental frequency of the shortened, air-filled tube is equal to the third harmonic of the original tube?

Q : Estimate the heat loss from the kiln

If the outside heat transfer coefficient is approximately 5 W/(m2K), estimate the heat loss from the kiln. Take k = 2.4 W/(mK) for zirconia brick.

Q : How does this change affect the flux of sunlight

The Sun is lower in the sky during the winter than it is during the summer. a.) How does this change affect the flux of sunlight hitting a given area on the surface of the Earth?

Q : Find average heat transfer coefficient and pressure gradient

What is the average heat transfer coefficient and pressure gradient inside the tube when the tube wall is at 320 K and water enters at 300 K, 1 atm pressure, and flows at a velocity of 3 m/s?

Q : Velocity of the particle as a function of time

A particle moves in the xy plane with constant acceleration. At t = 0 the particle is at 1 = (4.4 m) + (3.3 m), with velocity 1. At t = 3 s, the particle has moved to 2 = (11 m) - (1.9 m)and its velocity has changed to 2 = (4.5 m/s) - (5.8 m/s).ha

Q : Determine the required mass flow rate of steam

Determine the required mass flow rate of steam. Also, show the process on a T-s diagram with respect to saturation lines.

1957639

Questions
Asked

3,689

Active Tutors

1430585

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Estimate the heat loss from the kiln

Reference No:- TGS0747992

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Gravity combine for an acceleretion

Q : Find column height if the manometer fluid were mercury

Q : Write down the component of the acceleration

Q : Fundamental frequency of the shortened air-filled tube

Q : Estimate the heat loss from the kiln

Q : How does this change affect the flux of sunlight

Q : Find average heat transfer coefficient and pressure gradient

Q : Velocity of the particle as a function of time

Q : Determine the required mass flow rate of steam

Autosomal recessive disorder mutation in the cftr

Diagnostic radiopharmaceutical used for myocardial perfusion

What resident right is being violated

What are the goals of the medical management

Problem about power of group influence in social psychology

Differences between leadership and management

Can have a plan written and implemented

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Estimate the heat loss from the kiln

Reference No:- TGS0747992

Recent Questions Asked Mechanical Engineering

Q : Gravity combine for an acceleretion

Q : Find column height if the manometer fluid were mercury

Q : Write down the component of the acceleration

Q : Fundamental frequency of the shortened air-filled tube

Q : Estimate the heat loss from the kiln

Q : How does this change affect the flux of sunlight

Q : Find average heat transfer coefficient and pressure gradient

Q : Velocity of the particle as a function of time

Q : Determine the required mass flow rate of steam

Asked Questions