Drawing low pass pi-section filter-low pass t-section filter

Question

1) Draw a low pass T-section filter which is having a cut-off frequency of 1.5 KHz to operate  with terminated load resistance of 600 ohms.

2) Sketch a low pass pi-section filter  which is having a cut-off frequency of 2 KHz to operate with V(s) =a load resistance of 400 ohms.

3) Sketch  a high pass filter with a cut-off frequency of 1 KHz with a terminated  design impedance of 800 ohms.

4) Sketch  a m-derived low pass filter having cut-off frequency of 1.5 KHz with a   nominal impedance of 500 ohms, and resonant frequency is 1600 Hz.

5) Design a m-derived high pass filter with a cut-off frequency of 10 KHz, design impedance of 600 ohms and m = 0.3.

6) Determine the frequency at which a prototype Ti-section low pass filter which is having a Cut-off  frequency 1.5Khz has an attenuation of 20 dB.

7) Sketch full series equalizer for a design resistance R_Q-600 ohms, and attenuation of 20 dB at 400 Hz. Compute the attenuation Mat 1000 MHz.

8) Sketch the  full  shunt  equalizer,  for  design  resistance R_Q=600  ohms and an attenuation at frequencies of 600 Hz and 1200 Hz.