discuss to describe as best as possible an automatic garage door opener system. You should either use one you are familiar with as an example, or recall the details from one or more that you imagine could be available with the combined features, or design one yourself with new features.
Your system must have at least two button type inputs, at least two logical sensor inputs, and one logical actuator. The motor system can have its own control system that is embedded in your system. You will not describe this control system but only the high level control inputs and logical sensor values it provides. For example, a control value to the motor could be Up, Down, Start, Run, Slow, Fast, Stop, and sensor inputs could be: Moving, Stopped, High Torque, Low Torque, or Over Torque. You should include some safety sensors, limit sensors, etc. You do not have to locate these devices in the catalogs but only describe in simple terms what each actuator or sensor is suppose to accomplish and how it does its job.
You should draw on one page a block diagram of the system, and on another page describe all the relevant components. For example a motor that can drive the door up or down depending on…(write more here).
You should describe all the logical sensors, logical actuators, and buttons in your system.
You should make an attempt to break the system down into a number of states, and describe how each input causes the system to leave or enter a different state, as well as what outputs are active in each state.