Determine the time cyndrical tin takes to drain water, Mechanical Engineering

Determine the time cyndrical tin takes to drain water

A cyndrical tin can with diameter D_1= 85mm, has circular hole drilled in the bottom with diameter D_2= 6.35 mm. initially, at time t=0 sec, the tin can is filled with water to height of h_0= 103 mm. Derive an expression for the water level height h(t) as a function of time and determine the time it takes to drain. Assume the flow is incompressible and inviscid (i.e. use bernoulli).

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Determine the time cyndrical tin takes to drain water

Reference No:- TGS0736211

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : Proportion of the rods exceeds tolerance limits

Some plastic rods are automatically cut into lengths of 6 in. Actual lengths are normally distributed about a mean of 6 in and their standard deviation is .06 inches. What proportion of the rods exceeds tolerance limits of 5.9 inches and 6.1 inches

Q : Estimate the mean time of continuous

It is desired to estimate the mean time of continuous use until a wireless router will first required service. If it can be assumed that the standard deviation is 60 days,

Q : Space craft attempts to escape from your spacecraft

The crew of an enemy space craft attempts to escape from your spacecraft, by moving away from you at 0.281 of the speed of light. But all is ot lost! You launch a space torpedo toward the foe at 0.347 of the speed of light with respect to you. At

Q : What is the specific weight of this water

The density if water at sixty degrees Fahrenheit and atmospheric pressure is sixty-two point four lbm/ft^3. What is the specific weight of this water? NOTE: Gravity = 31.6 f/s^2

Q : Determine the time cyndrical tin takes to drain water

Derive an expression for the water level height h(t) as a function of time and determine the time it takes to drain. Assume the flow is incompressible and inviscid (i.e. use bernoulli).

Q : Caculate the difference between the wall temperature

A water stream is heated in fully developed flow through a pipe with uniform heat flux at the wall. The flow rate is m=10g/s, the heat flux q"=0.1 W/cm2, and the pipe radius r0=1cm.

Q : Calculate head of crest of model for maximum discharge

The maximum discharge is 3,000 CFS when the head on the crest of the spillway is 5 feet. Using a model scale of 1:10, calculate head of the crest of the model for the maximum discharge (in inches).

Q : What is the force per unit length between the wires

Two long, parallel wires carry currents of 0.245 A in the same direction. If the wires are 0.034 m apart, what is the force per unit length between the wires? is the force attractive or repulsive? show work.

Q : Determine the average heat transfer per unit width

If the plate is held at 30C, determine the average heat transfer per unit width, assuming that the critical Reynolds number, Re = 500,000.

1951470

Questions
Asked

3,689

Active Tutors

1450783

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Determine the time cyndrical tin takes to drain water

Reference No:- TGS0736211

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Proportion of the rods exceeds tolerance limits

Q : Estimate the mean time of continuous

Q : Space craft attempts to escape from your spacecraft

Q : What is the specific weight of this water

Q : Determine the time cyndrical tin takes to drain water

Q : Caculate the difference between the wall temperature

Q : Calculate head of crest of model for maximum discharge

Q : What is the force per unit length between the wires

Q : Determine the average heat transfer per unit width

What facilitate a stable, safe, pain-free cervical posture

Interview a bsn-prepared nurse

Does the patient have pearl pupils

Teaching a client with osteoarthritis about self-management

Nurse teaching client with hiv receiving antiretroviral

Nurse is planning care for client who had hip replacement

Describe nurse is caring for a client with hemophilia

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Determine the time cyndrical tin takes to drain water

Reference No:- TGS0736211

Recent Questions Asked Mechanical Engineering

Q : Proportion of the rods exceeds tolerance limits

Q : Estimate the mean time of continuous

Q : Space craft attempts to escape from your spacecraft

Q : What is the specific weight of this water

Q : Determine the time cyndrical tin takes to drain water

Q : Caculate the difference between the wall temperature

Q : Calculate head of crest of model for maximum discharge

Q : What is the force per unit length between the wires

Q : Determine the average heat transfer per unit width

Asked Questions