Determine the natural frequency of vibration, Mechanical Engineering

Determine the natural frequency of vibration

A mass m is suspended from a spring of stiffness 4000N/m and is subjected to a harmonic force having amplitude of 100N and frequency 5 Hz. The amplitude of the forced (steady state) motion of the mass is observed to be 20 mm.
a) Determine the natural frequency of vibration?
b) Determine the value of m?

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Determine the natural frequency of vibration

Reference No:- TGS0733370

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : Designing kitchen appliances

You're an engineer designing kitchen appliances, and you're working on a two-speed food blender, with 3700 rpm and 2200 rpm setting. Specs call for the blender to make no more than 60 revolutions while it's switching from high to low speed. If it

Q : Probability of getting a license plate

What is the probability of getting a license plate that has a repeated letter or digit if you live in a state in which license plates have one numeral followed by three letters followed by three numerals? (Round your answer to one decimal place(an

Q : Find the angular velocity of the sphere and hoop

A 10 lb sphere 6 inches in diameter and a 10lb hoop 12 inches in diameter roll down a 30 degree slope, find the angular acceleration and the acceleration of the mass center for the 2, Find the angular velocity of the sphere and hoop after they have

Q : Utilization factor for system

At a local fast-food joint, cars arrive randomly at a rate of 12 every 30 minutes. It takes an average of 2 minutes to serve each arrival. The utilization factor for this system is:

Q : Determine the natural frequency of vibration

A mass m is suspended from a spring of stiffness 4000N/m and is subjected to a harmonic force having amplitude of 100N and frequency 5 Hz.

Q : Velocity of the car just before the collision

A 1120 kg car experiences an impulse of 30,000.0 N · s during a collision with a wall. If the collision takes 0.43 s, what was the velocity of the car just before the collision?

Q : Determine volume of the object if fully immersed in water

An object weighs 275 N when fully immersed in water and 325 N when fully immersed in oil of specific gravity 0.9. Determine the volume of the object (in m3).

Q : What the surface temperature would be to dissipate

A small radiant heater has a metal strips 6 mm wide with a total length of 3 m. The surface emissivity of the strips is 0.85. To what temperature must the strips be heated if they are to dissipate 200 W of heat to a room at 25 degrees celcius?

Q : What must be the thickness of the oil film

A thin layer of oil (of absolute viscosity = 0.40 N-s/m2) separates the plate from the table. To limit the shear stress in the oil layer to 1 kPa, what must the thickness of the oil film be (mm)?

1952724

Questions
Asked

3,689

Active Tutors

1440005

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Determine the natural frequency of vibration

Reference No:- TGS0733370

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Designing kitchen appliances

Q : Probability of getting a license plate

Q : Find the angular velocity of the sphere and hoop

Q : Utilization factor for system

Q : Determine the natural frequency of vibration

Q : Velocity of the car just before the collision

Q : Determine volume of the object if fully immersed in water

Q : What the surface temperature would be to dissipate

Q : What must be the thickness of the oil film

Study and demonstrates first-order kinetics

Applying awareness of cultural values and practices

Briefly describe the influence of organizational behavior

Discussion about social networking analysis in healthcare

Problem concerning acute deep vein thrombosis

Positive or negative health promotion post amputation

What condition to present with fatigue, shortness of breath

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Determine the natural frequency of vibration

Reference No:- TGS0733370

Recent Questions Asked Mechanical Engineering

Q : Designing kitchen appliances

Q : Probability of getting a license plate

Q : Find the angular velocity of the sphere and hoop

Q : Utilization factor for system

Q : Determine the natural frequency of vibration

Q : Velocity of the car just before the collision

Q : Determine volume of the object if fully immersed in water

Q : What the surface temperature would be to dissipate

Q : What must be the thickness of the oil film

Asked Questions