Determine the mass flow rate of the steam


Solve the following problem:

Q: A steam power plant operates on the reheat regenerative Rankine cycle with a closed feedwater heater. Steam enters the turbine at 12.5 MPa and 550°C at a rate of 24 kg/s and is condensed in the condenser at a pressure of 20 kPa. Steam is reheated at 5 MPa to 550°C. Some steam is extracted from the low-pressure turbine at 1.0 MPa, is completely condensed in the closed feedwater heater, and pumped to 12.5 MPa before it mixes with the feedwater at the same pressure. Assuming an isentropic efficiency of 88 percent for both the turbine and the pump, determine

(a) The temperature of the steam at the inlet of the closed feedwater heater,

(b) The mass flow rate of the steam extracted from the turbine for the closed feedwater heater,

(c) The net power output, and

(d) The thermal efficiency.

Solution Preview :

Prepared by a verified Expert
Mechanical Engineering: Determine the mass flow rate of the steam
Reference No:- TGS02008559

Now Priced at $20 (50% Discount)

Recommended (97%)

Rated (4.9/5)