Calculate time necessary for the rod to cool temperature
A long stainless steel rod (18% Cr, 8% Ni) has a diameter of 6.4 mm. It is initially at a uniform temperature of 25 °C and is suddenly immersed in a liquid at 150 °C with h = 120 W/m2-°C. Calculate the time necessary for the rod to cool to 120 °C.
Expected delivery within 24 Hours
A cylinder has 0.1 kg air at 25oC, 200 kPa with a 5 kg piston on top. A valve at the bottom is opened to let the air out and the piston drops 0.25 m towards the bottom.
Assume that the Mercury 50 operates on an ideal Brayton cycle (no regeneration), and that the working fluid is air with variable specific heat, determine i) the thermal efficiency, ii) power output.
Air at 35°C, 105 kPa, flows in a 100 mm × 150 mm rectangular duct in a heating system. The volumetric flow rate is 0.015 m3/s. What is the velocity of the air flowing in the duct and what is the mass flow rate?
Suppose the U.S. president wants an estimate of the proportion of the population who support his current policy toward revisions in the Social Security system. The president wants the estimate to be within 0.038 of the true proportion.
It is initially at a uniform temperature of 25 °C and is suddenly immersed in a liquid at 150 °C with h = 120 W/m2-°C. Calculate the time necessary for the rod to cool to 120 °C.
Nitrogen gas in an expandable container is cooled from 50.0°C to 10.0°C with the pressure held constant at 3.00 x 105 Pa. The total heat liberated by the gas is 2.50 x 104 J. Assume that the gas may be treated as ideal. For N2 , CV = 20.76 J/
A 3-in. diameter rod of copper is to be reduced to a 2-in. diameter rod by being pushed through an opening. The modulus of elasticity for the copper is 17 x 106 psi and the yield strength is 40,000 psi.
If the coefficient of friction between the axe and grindstone is 0.4, find the normal force with which the axe was pressed aginst the grindstone.
The compression and power stroke efficiencies are 90%. Using the provided engine data, determine the charge mass (grams). The cut-off ratio.
1956256
Questions Asked
3,689
Active Tutors
1424838
Questions Answered
Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!
but I would like to discuss to what extent employers should/should not influence or curb political participation in their workplaces.
Suppose you are the head of an island nation with a poor, growing population and the natural resources of the island are being degraded.
Question: What was the economic and political impact, if any protect the health and welfare to citizens ?
Problem: Article 3 of the Texas Constitution sets up the Texas Legislature. It also does which of the following?
Summarize how the ERA can be ratified and explain why this is the most likely way. You will draw on instances that are important to you
Which amendment to the U.S. Constitution is often called the "States' Rights Amendment" and is commonly used by states to challenge
Mechanisms of State-Led Development:** - **Industrial Policy:** Both countries used targeted industrial policies to support specific sectors, such as electroni