Assignment Help - homework help

  Erection and Testing of Dish Antenna

Introduction to Erection and Testing of Dish Antenna:

To study the installation and testing of dish antenna.

Components Needed:

S.No.

Name of Components/Apparatus

Quantity

1.

2.

3.

4.

5.

DTH Antenna(Direct-To-Home)

LNB(Low Noise Block down converter)

Satellite receiver

RG6 co-axial cable

T.V

1

1

1

25 metre

1 set

Dish Antenna:

It is a receiver antenna that receives the signals propagated by the satellite and provide to the T.V. Receiver.

Process for the Installation of Antenna:

I. Choosing the proper place: First we should select the correct place for installation.

1.    It have to be an open place. Objects such as trees, hills, buildings should be avoided since the signals will be weak.

2.    It should be visible and have to be fixed in the direction of the satellite.

3.    The place selected, have to be 20 feet along the power line.

4.    It can be installed on a terrace, upstairs, out walls or pillar.

II. Ground

A good grounded minimise the bad reactions.

1.  The bad influences from, lightning and thunder affects the receiver. It may be shocked while operation, even death will also be happen. Thus it must be grounded properly.

2.  We can make the ground along with parallel to EB ground. Otherwise we can ground separately through using pipes.

III. Assembling of Antenna

1.  The antenna have be fixed very strong, even should not disturbed through any natural calamities like storm, rain etc.

2.  We can make use of the RG6 cable wires to connect the TV and the antenna.

3.  The cable has to be 25m length.

4.  We can receive the transmission line via walls or ground.

IV. Fixing and testing of antenna

1. First select the direction of the satellite and then fix the stand of dish antenna. After fixing, the antenna stability and strength have to be tested.

2. Angle (AZ-EL) of the dish antenna must be checked and then it must be fixed with

Screws and bolts. [AZ side angle left to right, EL-up and down angle].

3. Then fix LNB with V shape bolt-nut at the opposite side of the dish.

4. Cable wire must be connected among T.V and antenna.

Latest technology based Electrical Engineering Online Tutoring Assistance

Tutors, at the www.tutorsglobe.com, take pledge to provide full satisfaction and assurance in Erection and Testing of Dish Antenna homework help via online tutoring. Students are getting 100% satisfaction by online tutors across the globe. Here you can get homework help for Erection and Testing of Dish Antenna, project ideas and tutorials. We provide email based Erection and Testing of Dish Antenna homework help. You can join us to ask queries 24x7 with live, experienced and qualified online tutors specialized in Erection and Testing of Dish Antenna. Through Online Tutoring, you would be able to complete your homework or assignments at your home. Tutors at the TutorsGlobe are committed to provide the best quality online tutoring assistance for Electrical Engineering homework help and assignment help services. They use their experience, as they have solved thousands of the Electrical Engineering assignments, which may help you to solve your complex issues of Erection and Testing of Dish Antenna. TutorsGlobe assure for the best quality compliance to your homework. Compromise with quality is not in our dictionary. If we feel that we are not able to provide the homework help as per the deadline or given instruction by the student, we refund the money of the student without any delay.
Home | Company Overview | Services | Discover Q&A | Sitemap | Contact Us | T & C | Refund Policy | Copyright Policy | Blog | Q&A | Directory

©TutorsGlobe All rights reserved 2022-2023.