Cleaning of the Mixie

Introduction to Cleaning of the Mixie

Body and Top Cap:

Clean body and Top Cap through a damp cloth and wipe dry. Don't make use of abrasives or water for cleaning.

Stainless Steel Jars and Blades:

Fill in half (1/2) litre of lukewarm water and a teaspoon of any mild cleaning power. Operate the unit on speed 1 for 30 Seconds. Rinse and dry. All the time stores Jars in inverted position, to permit water to drain off.

Repairs and Remedies:

1) Fault: Motor is not working

Possible Reason:

  • No voltage or Low voltage
  • Either motor field or armature coil might get open circuited.

Remedy:

  • Test the supply voltage with multimeter.
  • Perform the continuity test. If there is an open circuit fault, do the service.

2) Fault: Supply voltage is accurate. But motor is not running.

Possible Reason:  Overload in the jar and therefore overload protector may get tripped.

Remedy: Press the overload relief button and eliminate some materials in the jar. Now restart.

3) Fault: Motor rotates at similar speed in all speed settings.

Possible Reason: Might be loose connections in the regulator.

Remedy: Test and solder the wires at regulator terminals.

4) Fault: Excessive heat generated

Possible Reason:

  • Might be any short circuit in armature or field coils.
  • There may be wear and tear in the bearings.

Remedy:

  • Perform the continuity test. If there is a short circuit fault, do the service.
  • Test and put lubricating oil at bearings. If heat persists, replace it.

Latest technology based Electrical Engineering Online Tutoring Assistance

Tutors, at the www.tutorsglobe.com, take pledge to provide full satisfaction and assurance in Cleaning of the Mixie homework help via online tutoring. Students are getting 100% satisfaction by online tutors across the globe. Here you can get homework help for Cleaning of the Mixie, project ideas and tutorials. We provide email based Cleaning of the Mixie homework help. You can join us to ask queries 24x7 with live, experienced and qualified online tutors specialized in Cleaning of the Mixie. Through Online Tutoring, you would be able to complete your homework or assignments at your home. Tutors at the TutorsGlobe are committed to provide the best quality online tutoring assistance for Electrical Engineering homework help and assignment help services. They use their experience, as they have solved thousands of the Electrical Engineering assignments, which may help you to solve your complex issues of Cleaning of the Mixie. TutorsGlobe assure for the best quality compliance to your homework. Compromise with quality is not in our dictionary. If we feel that we are not able to provide the homework help as per the deadline or given instruction by the student, we refund the money of the student without any delay.

©TutorsGlobe All rights reserved 2022-2023.