wave winding

in wave winding if dummy coil is present then how we specified connection...and also how we calculate the no of conductor in one pole ..

   Related Questions in Electrical Engineering

  • Q : Find current in conductor of permanent

    The pole faces of a permanent magnet measure 100 millimeter high by 200mm wide. This is needed to acquire an acceleration of 10ms-2 of a single length of current-carrying conductor that weighs 250gm-1 and is positioned vertically inside the magnetic field, passing horizontal

  • Q : Determine the force between two charged

    Determine the force between two charged bodies, Q1 and Q2, having charges of Q1 = 0.5 C and Q2 = 0.25 C, respectively and placed a distance of 10 cm apart if Coulombs Constant, ke =8.98 x 109. 

  • Q : Calculate the current needed to feed

    A coil having of 6,000 turns is wound upon a former of length 12cm and diameter 3cm that has a wax core having a relative permeability of 1,500. The coil should produce a total magnetic flux of 0.1 Wb. Calculate the current needed to feed the coil.

  • Q : Calculate the maximum thickness of the

    Excess minority carriers are injected within a thin slice of doped semiconductor of uniform cross-sectional region and are permitted to diffuse across the material. There diffusion coefficient for the material is 50cm2s-1 as well as the minority

  • Q : Analysis on Wireless Technology 4. When

    4. When the bit rate of a message signal from the message sequence generator and the bit rate of a PN code from the multiple sequence generators are compared, which is higher? How did you compare them? Could you determine by how much the bit rate of one is higher?

  • Q : Does design for upgradeability really

    Does design for upgradeability really work?

  • Q : How do we convene deadlines in an

    How do we convene deadlines in an embedded system?

  • Q : What principle do the Transformers work

    Describe in brief on what principle do the Transformers work?

  • Q : Hamming code Specify the intention of

    Specify the intention of using the hamming code?

  • Q : Indirect Grid Connection & battery bank

    Large-scale use of wind power raises many questions in integration into the existing electric power grid. Wind power is an intermittent energy source which must be used when available. If a large fraction of a system's energy is to come from wind power, provisions must be made to supply load duri

©TutorsGlobe All rights reserved 2022-2023.