--%>
Assignment Help - homework help

Performance of functional-non functional embedded needs

Explain the Performance of functional or non functional requirements in embedded system.

E

Expert

Verified

Performance requirement may be functional or non functional requirements consist of following:

  • The speed of the system is main consideration for its ultimate cost and for the usability of the system.
  • It may be a combination of soft performance deadline and metric by that a particular operation should be completed.

   Related Questions in Electrical Engineering

  • Q : Level-Sensitive Scan Design and

    Describe the Level-Sensitive Scan Design and System-level busses.

    		•
  • Q : Features of ROM and cross point in ROM

    Explain the features of ROM? Describe in detail. What do you understand by a cross point within the ROM?

    		•
  • Q : Mode coupling condition A multimode

    A multimode fiber is employed to couple light into a single mode fiber. Both of the fibers have the similar total diameter. Explain the coupling in brief. Use equations, MATLAB, and so on if necessary.

    		•
  • Q : Merits and demerits of FIR filters

    Describe the merits and demerits of FIR filters as compared to the IIR counterparts.

    		•
  • Q : Find out voltage across and current by

    Determine a Thevenin and a Norton Equivalent Model for the circuit demonstrated in figure given below. Find out, using the models, the voltage across and the current by the load resistance that is RL, and the power consumed through the load. Verify both models present

    		•
  • Q : Meaning of FIR filter Explain the

    Explain the meaning of the FIR filter?

    		•
  • Q : Operating mode 2 of 8051 serial port

    Specify the operating mode 2 of the 8051 serial port?

    		•
  • Q : Problem on Circuit analysis A student

    A student builds the circuit shown below. As it is the circuits contains two major mistakes. Your task is to identify these mistakes and suggest a solution for each. When identifying solutions explain for each case where the mistake is and why the circuit will not wor

    		•
  • Q : Find out the force between two charged

    Find out the force between two charged bodies that are Q1 and Q2, containing charges of Q1 = 0.5 C and Q2 = 0.25 C, correspondingly and placed a distance of 10cm apart when Coulombs Constant, ke = 8.98 x 109<

    		•
  • Q : Find coefficients with evaluating

    A Wheatstone bridge based pressure transducer includes a transfer characteristic specified by the relationship as given below: Vout = bp + cp2 Here p is the input pressure applied to the transducer that is calibrated for end point accuracy. So, the transducer

    		•